[DF 2013] Group 6:Wedding Skin

 

由四面體結構發展，創造能貼合人體活動的禮服、構造設計。

利用吸管作為基礎桿件，再以C型金屬環作串接，使單元與單元能自由活動。

四面體以邊接邊、點接點兩種方式鍵結，使構件能配合人的行動貼合表層變動。


It's a dress creation that can fit the Wearer's body when he/she moving.
It's also a kind of Structural design based on Tetrahedron structure combinition.
Straws were used as the main material in this structure, and they were joint by some C-shaped metal rings.
This way, each Tetrahedron unit can move easily.
These Tetrahedron units connect with each aother by two ways,edge to edge and point to point.
Therefore, this component is capaple to fit the wearer's clothes and change with movement.

原始的單元 操作於Grasshopper

單元由吸管構成

經熱壓封口並穿洞作為單元

模型試做 單元

模型試做 單元組構

組構部份單元

嘗試貼合背部彎曲動作

新一帶設計展實況

華山展出

小組成員

   陳翰璋                 林泳君               詹欣穎                 羅玟星               許琇雁

[DF 2013S] Group 1 - The Waltz of Barnacles

[DF 2013S] Group 1 - The Waltz of Barnacles

Members

Case Study

voltaDom by Skylar Tibbits, Lecturer, Department of Architecture
Location: Passageway between Buildings 56 and 66

A vaulted passageway inspired by the vaulted ceilings of Gothic cathedrals.  Curves within curves emerged from an innovative fabrication technique that transforms complex double curved vault construction to that of simply rolling a sheet of material.

VoltaDom, by Skylar Tibbits - for MIT's 150th Anniversary Celebration & FAST Arts Festival 
(Festival of Arts, Science and Technology)(http://www.sjet.us/MIT_VOLTADOM.html)

Concept                                                             

we are Inspired by the Balanus and its ability of  fitting on the surface.In order to simplify the structure and the entire relationship of each pieces ,by rolling single piece of material which is able to be bent into a specific shape,owning thecurvatures by itself.

(Right) Inspired by Barnacle its abilities of attachment and  variability.
(Left) The prototype of voltaDom, building a free-standing arch would suffice as a representative model.

Design Development

Study: the better way to spilt and smash the componen

 4 sheets of material taken from the global form and smash test 

a unit contains four pieces

a paper-cut layout

the paper model

Grasshopper Programming I

a single form unit is lofted by two circles on a vertical axis

and trimmed by a internal box; three parameter to control its form:

1.radius of the lower circle

2.height between two circles

3. radius of the upper circle

the grasshopper program contains two typical form:

1.a single form unit /2.surface to morph

the second part of the grasshopper program is to morph the form unit on a rhino surface

Grasshopper Programming II

In order to make every single parts could be smashed successfully . 

We has refined our program to the second stage,with an eye to making sure that the :

1. The original unit form would be trimmed twice

   by the trim box (side part) and the trim plane (top part)

2. Parameter redefined:

   -Lower circles radius ∝ 1/Height

   -Height ∝ 1/Upper circle radius

3. Frame wire system created

New Grasshopper Program

the Unit Form: with it's top trimmed by the trim plane

the final unit form with it's extruded frame wire part(green part)

Morph the Unit Form: on a simple surface 

Clothes Design-The Waltz of Barnacles

The Global form should have an arch-like shape, with an eye to maintaining the strength of the structure and supporting capacity

Units Morphed on the Body Model

Units Morph on the Clothing Model

 Installation Art in Lobby

  The Global form should have an arch-like shape, with an eye to maintaining the strength of the structure and supporting capacity

Buckles 

In order to make the produce process faster, we have a new system for buckles

[DF 2013] Group 3: Skin Texture

嘗試以金屬或彈性材質控制布料，並應用在作品上。作品將擁有可互動的特性，會依照使用者的行為而變化，變化根據材質與材質間的特性相互激盪而產生，布料的紋路與變化將出現不可預期或更佳的狀況，也因此將帶給使用者不同以往的觸覺或視覺體驗。

[初步階段提案]

[第二階段提案]

[最終展場提案]

[製作過程]

以黏膠塗抹於布料上，並藉由塗料的劑量差異而使布料的彈性得以被控制，藉此控制布料的形狀，但最終因布料與塗料的結合度太差而以失敗告終。
以木筷固定於布料之內，藉由拉扯布料使木筷的形狀與布料產生強烈形變，最終因形狀無法被有效控制而失敗告終。

以鐵絲製作骨架，並將布料纏上，最終發現布料因為與鐵絲相斥而產生有力且有趣的摺皺且形狀是可被預期且可被控制的。

[第一階段材質試驗]

[第二階段材質試驗]

Skin Texture的運作主要依靠兩種單元相互配合而成，單元系統可分為布料與斷面單元。布料單元為皮層系統，斷面單元則是骨架系統，兩者相互配合，並以斷面單元系統控制皮層系統。

 01

 02

 03

04

[雷切單元] 

材質：壓克力

[提案實作]

斷面單元系統主要負責將布料單元與人體進行銜接，因此斷面單元須符合人體尺度及考量適當的結構強度，以體格最粗壯的組員為尺度參考，並雷射切割出適當的斷面使單元可以順利的套上手臂。在反覆嘗試出適當尺寸後，將布料單元的壓克力棒置入斷面單元，並藉由壓克力棒與布料的相互拉扯創造理想的曲面。

[連動過程]