[NTUT] Digital Fabrication: 6月 2012

[DF 2012] Group 1: Rhythm

Group 1 Rhythm

Concept

本組藉由對Polymorphic案例與仿生獸的觀察與分析，
發展出一種可變形的機構，並將機構利用在
燈具的設計中，使變形與照明效果產生連結。

We observed two cases.
One is Polymorphic and another is Theojansen.
Then we followed some of their mechanisms and used them to develop our design.
Our goal is to create a transformed construction.
After we decided our goal, we tried to make a connection between transformation and light.
Finally, we got a light tool which can be transformed by hands.

Members

Wen-Yu Huang / Sin-Po Wang / Yin-Zhi Yang /Ya-An Tsai

Chia-Chih Hsieh / Yu-Xun Wei / Ping-Jen Wu / Ching-Fen Tsang

Design Development

Digital Analysis

Studying and analysis - principle

Studying and analysis - form 1

Form studying and analysis - form 2

Form studying and analysis - form 3

Implementation

Studying

Final way of joint

Material and joint

Unit

way to wriggle

Final Result

[DF 2012] Group 4: Burst

Group4

Group Members

Burst

http://archinect.com/features/article/33451419/showcase-white-elephant-privately-soft
Explosion will present the concept of when the explosion occurred a full range of divergent when the energy
is reduced with increasing distance like water ripples wave will be when the material hit the water with
distance away amplitude decreases

Design Development

By a number of major control point to control the six opening size, and changes

Fabrication Process

The final 3D model by the distance with the angle of perspective and lighting to control the size and depth of
openings

Joint testing and physical assembly

One to a digital operation
Final result

[DF 2012] Group 2: Starry Night

Group2

星空下Starry Night

Group Members
蘇修白 Hsiu Pai, Su; 闞元梅 Yuan Mei, Kan; 王南堯 Nan Yao, Wang; 何孟璉 Meng Lian, Ho; 許庭榕 Eileen Hsu

Hsiu Pai, Su Yuan Mei, Kan Nan Yao, Wang Meng Lian, Ho Eileen Hsu

Concept
At the very beginning, we just have an idea of accomplishment of a curved surface in our real space. With the curved surface, we try to create the space, making people feel the “undefined” universal space, while the lights come through form above. It’s a scenario of the spectators look up at the staring night.

Design Development

Form studying and analysis

Making the patterns with holes for lighting

Take the Galaxy as the beginning, we drew a virtual line as the basis and let the holes followed the basis. When the holes got closer to the line, they became bigger.

Fabrication Process

Materials

To surface conversion flat surface divided into two triangular plane, in experimental models using cardboard found to need more toughness of the material in the actual assembly, So finally we decide to choice PP.

Tolerance of the material

Ways of connecting and joining

To connect the quadrilaterals, instead of using glued, we use tenon joints, and we studied many different types of the joints. The first time we practice and applied the joints to every edges, we failed in the end. The problems come from not only from its self, but also from the weight of the whole objects. Problems result from the scale and the material of the joints. Therefore, the second version practice, we change the shape of the joints, and its material we use acrylic instead of paper.

the latches would be stuck in the hole on the joint because they slide to different direction

According to experience assembling of experimental model , we found that the flexibility of material would make the latch slide off the hole .So we changed the shape of latch , bigger head part would stuck once the latch was insert to the hole.

assembling

Final Result

[DF 2012] Group 5: Sprawl

GROUP 5
Sprawl 蔓生

Group member

KenYing Tseng / Yu Ruei Liou / Shun An Wang / Siao Ling Jheng / Yue Ying Li / Yun Ting Hsu / Cing Lu /Jia Jia Shi

Concept

Sprawl 蔓生

First of all , The form of the vine (plants) growing type is which we try to imitate,
We Attempt to develop a kind of the varied-unit (pattern ) to simulate the shape of the vine.

Design Development

藉由案例的發想，而決定使用彈性材料

[DF 2012 ] Group 8: Prometheus

Group8

Prometheus
Groupmember

黃朝鈺_Darcy Huang

徐國峰_Frank Hsu

黃聖皓_Makino Haruka

林偉_Penicil Lin

楊斯尹_Zing Yang

許媛翔_Hsiang Hsu

Concept

以燈源作為視覺拉扯的中心,將板片進行二維的形變,其圍塑出的六角柱空間也隨之轉變,
將光的線性轉換成銀色版片的實體,試圖將光的方向實現形成光的雕塑。

[DF 2012] Group 9：Poseidon fork 海神叉

Info

研究分析:多星點形體是複雜的單元幾何。
其中以同一個中心點，生長出四個方向的軸線，進而研究幾何形體披覆術。
由拆解的單一面來看，都是由中心的三向幾何形銜接三叉管所構成。

構成:由研究得知，以往經驗三角化為最有效之披覆術，但於四叉形體並無完全統一單元之趨勢，因此設計重點在於不更變幾何形體之特定組構機制下，發展具有量產潛能的特殊單一版片，我們嘗試挑戰同樣的版片去建構一個四叉單元。
這些四叉單元經巧妙的計算得以以卡榫與其他單元相接，構成不同樣式的客製化形體。

客製化的自由形體猶如不同種類的珊瑚。我們稱她Coral-fly，猶如我們的仿生理念，再自由的形體依然是建立在系統機制操控的原則上。

Research and analysis: Star body is a complex geometry of the unit. Grow out of the four direction of the axis of which with a central point to study the geometry draping technique.

By the dismantling of the single side, are posed by the center to the geometric convergence of trigeminal tube.

Constitution: The study indicated that past experience triangle into the most effective drape technique, but the quad shape is not completely unified unit of the trend, so the design focused on the specific structuring mechanism is not more variable geometry, the development of production potential of the single special plates, we tried to challenge the same plates to construct a four-fork unit.

Quad unit clever calculations can be phase latches with other units, constitute the different styles of custom shape.

The free forms of customization like different types of coral. We called her Coral-fly, like the concept of the bionic, the freedom of the body is still based on the principle of the manipulation of the system mechanism.
(Google翻譯需修改)

Group members

Development

Design Development

發展模型-2Development model-2

製作過程：首先製作大量三叉型狀(平面)的板片(珍珠板)，以6~10個小片為一組，

把小片組織完成後，再用一組與一組去拼湊出不規則形，利用針去連接各組，並且支撐。

Production process: First, make a lot of trigeminal shape (flat) plate (pearl board), a group of 6 to 10 small pieces,

Small piece of tissue is complete, and then a group with a group of irregular in shape, to piece together the use of needles to connect to each group, and support.